motorola programming software issues cps

Press and hold Push to Talk (PTT) to exit programming mode or press MENU to continue programming. Press (-) or (+) to select the channel 3.(note that channel selection is the first setting after you enter the programming mode.) While in programming mode, press MENU until the channel number flashes and the frequency and code display off and on.In a simpler way, push down the push to talk (PTT) button together with the button underneath it firmly, and turn the radio on, it gives a beep sound with a flashing green light. The channel number flashes on the display, the frequency (indicated by FREQ) and code (indicated by CODE) will alternately display.Įnsure that you hold down the PTT button when programming, if you press and release the PTT button during programming, it takes you back to the program page thereby losing all what you have programmed. The radio will make a beep sound and display the PROG sign. Press and hold the Push to Talk (PTT) and MON button for 3 seconds while turning on the radio. To enter the programming mode on your device, make sure your radio is fully charged.

Microphone gain at frequency 2 (medium sensitivity). Operating frequency configuration (from a pre-programmed frequency list)īy default, your Motorola radio is programmed to these settings Ĭhannel 1- 8 each with its corresponding frequency from 1-8.The programmable settings on your walkie-talkie include Your Motorola radio programming mode allows you to change some settings while others are left unchanged as they are non-programmable. Motorola Programming Software Mototrbo Cps.The table below contains the current CPS version as well as the respective versions of CPS.

Tip: It is recommended you read this article until the bottom of the article.

CPS 2.0 is now the recommended customer programming software for Motorola MOTOTRBO two way radios. The CPS Archive Converter can convert both MTS2000 and MTS2000 DOS archives to the CPS-compatible format. Activate the CPS Archive Converter (Start-Programs-Motorola-MTS2000 Radio-CPS Archive Converter) and convert yourcodeplugs either individually, in groups, or on your entire hard drive. To convert DOS RSS archives to CPS-compatible format.

Motorola programming software issues cps